 |
Oakley Industries, Inc. Instant Heat Products Division Terminal Pins |
|
Oakley Industries, Inc. Instant Heat Products Division Terminal Pins |
| Below are the 5 wire diameters that we currently use to manufacture our terminal pins. We make these pins in lengths from 50mm to 230mm (2” to 9”). |
|
1.57mm
.062” 1.90mm
.075” 2.31mm
.091” 2.67mm
.105” 3.18mm .125” |
|
While these are the standard wire diameters for which we are tooled and for which we currently stock wire, if your volume is sufficient, we may be willing to make additional wire diameter terminal pins. |
| Below are shown the 5 typical styles of terminal pins that we commonly manufacture. |
|
Standard Upper Pin |
Standard Lower Pin |
|
Special Upper Pin This special upper pin with a tapered head allows for easier insertion of the upper sealing plug on the pins. |
Combination Pin The combination pin can be used for either an upper or a lower terminal pin. This design is not available in 2.67 and 3.18mm (.105” and .125”) pins. |
|
Universal Pin The universal pin can be used for either an upper or lower terminal pin and also has a tapered head to allow for the easier insertion of the sealing plug. This style pin is only available in 1.57 and 1.9mm (.062 and .075”) diameter pins. The use of the special Combination or Universal style pins significantly reduces the number of different pins a customer must stock.
|
|
For more information or for a quote on your pin requirements, please contact Mr. Thomas Mark, the manager of our Instant Heat Pin Division. |
